Industrial M8 Nut Installation Tool, Threaded Nut Pull Setter - ISO 9001:2015 Certified, CE Compliant
Master Palm pneumatic nut installation tool with 650 rpm free speed provides easy way to install threaded nutserts without extra efforts. The tool delivers pull action to install threaded nuts directly without extra tool.
Right angle nut installation and pull setter tool, M6 size, is reversible with simple direction valve trigger design. 650 RPM free speed for industrial use. Quickly install threaded nutserts.
The right angle nut setters use rear exhaust for better performance during operation.
After a period time of usage, users are advised to replace excessive thread wear mandrels with a high quality socket head cap screw.
Metric Size Matching Chart
Industrial grade rivet nut installation tools allow tool users to install threaded nutserts easily without using too much strength or other tools. Just cling onto it and press, the tool will put the threaded nut and set for complete installation. All rivet nut installation tools are ISO 9001:2008 certified with CE bookmarked. Industrial pneumatic rivet nut installation, the nut pull setter, operates on compressed air. Each tool comes with three years limited repair warranty. Choice of right angle or pistol grip / hand grip models or both.
|Metric Coarse||Metric Fine||BSF/BSW||UNC||UNF|
|M8 x 1.25||M8 x 1||5/16"||5/16-18||5/16-24|
|angle height||Total Height ( Mandrel Included ) : 3.885" Total Height Without Mandrel: 3.125" Low Height: 1.5 "/38 Mm|
|air pressure||90 psi/6.21 bar|
|free speed||650 rpm|
|horse power||0.9 hp/0.68kw|
|hose size||3/8"/9.52 mm|
|noise rating||81 dba|